hose and fittings
8705 W. Tidwell   Houston, Texas 77040 (832) 474-4440
Open Saturdays & after-hours
standard fittings fittings and adapters Product Catalog Downloads  credit cards accepted       Delivery United States Postal Service United Parcel Service
ALL PRODUCTS

HOSES

HOSE ENDS

FITTINGS

ADAPTERS

TUBING

QUICK DISCONNECTS

HAMMER UNIONS

COUPLINGS

CLAMPS

SEALS

HOSE REELS

AIR MANAGEMENT

VALVES

INSTRUMENTATION

GAUGES

MISCELLANEOUS

HOSE REPAIR

CATALOGS

QUICK REFERENCE




WRS Hose & Fittings
ISO Standards and Specifications hose and fittings

ISO - International Organization for Standardization

Industrial pipe, tube and fittings standards and specifications:


• ISO 7-1:1994-05 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation

• ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges

• ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1

• ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation

• ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauges

• ISO 264:1976 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; Laying lengths; Metric series

• ISO 265-1:1988 Pipes and fittings of plastics materials; fittings for domestic and industrial waste pipes; basic dimensions: metric series; part 1: unplasticized poly(vinyl chloride) (PVC-U)

• ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes

• ISO 580:1990 Injection-molded unplasticized poly(vinyl chloride) (PVC-U) fittings; oven test; test method and basic specifications

• ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series

• ISO 727-2:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series

• ISO 881:1980 Asbestos-cement pipes, joints, fittings/sewage/drain

• ISO 1179:1981 Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications

• ISO 1635-2:1987 Seamless wrought copper and copper alloy tube

• ISO 1651:1974 Tube drawing mandrels

• ISO 1684:1975 Wire, bar and tube drawing dies; Specifications

• ISO 2016:1981 Capillary solder fittings for copper tubes; Assembly dimensions and tests

• ISO 2035:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure; Pressure-resistance test

• ISO 2044:1974 Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe; Hydraulic internal pressure test

• ISO 2048:1990 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement

• ISO 2284:1987 Hand taps for parallel and taper pipe threads; General dimensions and marking

• ISO 2507-1:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method

• ISO 2507-2:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes

• ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

• ISO 2531:1998 Ductile iron pipes, fittings, accessories and their joints for water or gas applications

• ISO 2804:1996 Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions

• ISO 2851:1993 Stainless steel bends and tees for the food industry

• ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry

• ISO 3183-1:1996 Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1: Pipes of requirement class A

• ISO 3183-2:1996 Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2: Pipes of requirements class B

• ISO 3253:1998 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

• ISO/TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments

• ISO 3419:1981 Non-alloy and alloy steel butt-welding fittings

• ISO 3458:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure

• ISO 3459:1976 Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement

• ISO 3477:1981 Polypropylene (PP) pipes and fittings - density

• ISO 3501:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out

• ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending

• ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density

• ISO 3545-1:1989 Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section

• ISO 3545-2:1989 Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections

• ISO 3545-3:1989 Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section

• ISO 3586:1976 Glass plant, pipeline and fittings; general rules for testing, handling and use

• ISO 3587:1976 Glass plant, pipeline and fittings; Pipeline and fittings of nominal bore 15 to 150 mm; Compatibility and interchangeability

• ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness

• ISO 3604:1976 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure

• ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)

• ISO 4056:1978 Polyethylene (PE) pipes and fittings- designation

• ISO 4059:1978 Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and requirements

• ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series

• ISO 4144:2003 Pipework - Stainless steel fittings threaded in accordance with ISO 7-1

• ISO 4145:1986 Non-alloy steel fittings threaded to ISO 7/1

• ISO 4230:1987 Hand- and machine-operated circular screwing dies for taper pipe threads; R series

• ISO 4231:1987 Hand- and machine-operated circular screwing dies for parallel pipe threads - G series

• ISO 4397:1993 Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses

• ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density

• ISO 4422-1:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 1: General

• ISO 4422-2:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 2: Pipes (with or without integral sockets)

• ISO 4422-3:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 3: Fittings and joints

• ISO 4422-5:1997 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 5: Fitness for purpose of the system

• ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)

• ISO 4440-1:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method

• ISO 4440-2:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions

• ISO 4451:1980 Polyethylene (PE) pipes and fittings - determinati

• ISO 4483:1979 Asbestos-cement pipelines; Field pressure testing

• ISO 4486:1985 Asbestos-cement ventilation ducts and fittings; Dimensions and characteristics

• ISO 4488:1979 Asbestos-cement pipes and joints for thrust-boring and pipe jacking

• ISO 4704:1977 Glass plant, pipeline and fittings; Glass plant components

• ISO/TR 5168:1998 Measurement of fluid flow - Evaluation of uncertainties

• ISO 5251:1981 Stainless steel butt-welding fittings

• ISO 5256:1985 Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials

• ISO 5361:1999 Anaesthetic and respiratory equipment - Tracheal tubes and connectors

• ISO 5730:1992 Stationary shell boilers of welded construction (other than water-tube boilers)

• ISO 5969:1979 Ground thread taps for pipe threads G series and Rp series; Tolerances on the threaded portion

• ISO 6207:1992 Seamless nickel and nickel alloy tube

• ISO 6447:1983 Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material

• ISO 6448:1985 Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material

• ISO 6455:1983 Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series

• ISO 6594:1983 Cast iron drainage pipes and fittings; Spigot series

• ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods

• ISO 6761:1981 Steel tubes; Preparation of ends of tubes and fittings for welding

• ISO 6964:1986 Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification

• ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage

• ISO 7228:1993 Tracheal tube connectors

• ISO 7245:1984 Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and extrusion materials

• ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials

• ISO 7268:1983 Pipe components; Definition of nominal pressure

• ISO 7278-2:1988 Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters; part 2: pipe provers

• ISO 7279:1984 Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets

• ISO 7370:1982 Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths

• ISO 7387-1:1983 Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test methods

• ISO 7608:1985 Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water

• ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)

• ISO 7675:2003 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)

• ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

• ISO 7686:1992 Plastics pipes and fittings; opacity; test method

• ISO 8142:1990 Thermal insulation; bonded preformed man-made mineral fiber pipe sections; specification

• ISO 8283-1:1991 Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1: unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)

• ISO 8283-2:1992 Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2: polyethylene (PE)

• ISO 8283-3:1992 Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP)

• ISO 8283-4:1992 Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4: acrylonitrile/butadiene/styrene (ABS)

• ISO 8361-1:1991 Thermoplastics pipes and fittings; water absorption; part 1: general test method

• ISO 8361-2:1991 Thermoplastics pipes and fittings; water absorption; part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings

• ISO 8361-3:1991 Thermoplastics pipes and fittings; water absorption; part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings

• ISO 8434-1, :1994 Metallic tube connections for fluid power and general use - Part 1: 24 compression fittings

• ISO 8434-2:1994 Metallic tube fittings for fluid power and general use - Part 2: 37 flared fittings

• ISO 8434-3:1995 Metallic tube connections for fluid power and general use - Part 3: O-ring face seal fittings

• ISO 8434-4:1995 Metallic tube connections for fluid power and general use - Part 4: 24 cone connectors with O-ring weld-on nipples

• ISO 8434-5:1995 Metallic tube connections for fluid power and general use - Part 5: Test methods for threaded hydraulic fluid power connections

• ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test

• ISO 8492:1998 Metallic materials - Tube - Flattening test

• ISO 8493:1998 Metallic materials - Tube - Drift-expanding test

• ISO 8494:1998 Metallic materials - Tube - Flanging test

• ISO 8495:1998 Metallic materials - Tube - Ring-expanding test

• ISO 8496:1998 Metallic materials - Tube - Ring tensile test

• ISO 8497:1994 Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes

• ISO 8572:1991 Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing

• ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

• ISO 8772:1991 High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications

• ISO 8773:1991 Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications

• ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings - Test method and requirements

• ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

• ISO 9095:1990 Steel tubes; continuous character marking and colour coding for material identification

• ISO 9261:2004 Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods

• ISO 9356:1989 Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method

• ISO 9623:1997 PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series

• ISO 9625:1993 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes

• ISO 9691:1992 Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections

• ISO 9803:1993 Vacuum technology; pipeline fittings; mounting dimensions

• ISO/TR 9824-1:1990 Measurement of free surface flow in closed conduits; part 1: methods

• ISO 9808:1990 Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings; method of assessment

• ISO/TR 9824-2:1990 Measurement of free surface flow in closed conduits; part 2: equipment

• ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test

• ISO 10147:1994 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content

• ISO/TR 10358:1993 Plastics pipes and fittings; combined chemical-resistance classification table

• ISO 10400:1993 Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe properties

• ISO 10420:1994 Petroleum and natural gas industries; flexible pipe systems for subsea and marine riser applications

• ISO 10422:2001 Petroleum and natural gas industries - Threading, gauging and thread inspection of casing, tubing and line pipe

• ISO 10508:1995 Thermoplastics pipes and fittings for hot and cold water systems

• ISO 10806:2003 Pipework - Fittings for corrugated metal hoses

• ISO/TR 10837:1991 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings

• ISO 10928:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use

• ISO 10931-1:1997 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 1: General

• ISO 10931-2:1997 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 2: Pipes

• ISO 10931-3:1996 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 3: Fittings

• ISO 10931-4:1997 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 4: Valves

• ISO 10931-5:1998 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 5: Fitness for purpose of the system

• ISO/TR 11295:1992 Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings

• ISO 11413:1996 Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

• ISO 11414:1996 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

• ISO 11420:1996 Method for the assessment of the degree of carbon dispersion polyolefin pipe, fittings and compounds

• ISO 11496:1993 Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections

• ISO/TR 11647:1996 Fusion compatibility of polyethylene (PE) pipes and fittings

• ISO 11961:1996 Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification

• ISO 12162:1995 Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient

• ISO 13664:1997 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections

• ISO 13665:1997 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections

• ISO 13761:1996 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20

• ISO 13783:1997 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure